Half Hole With BGA Multi-Layer PCB And High Tg Laminate

Half Hole With BGA Multi-Layer PCB And High Tg Laminate

Hongmy circuits offer two types of gold finish: Electroless Nickel Immersion Gold (ENIG) as a surface finish for the whole PCB, and hard plated gold over plated nickel for edge-connector fingers. Electroless gold gives excellent solderability, but the chemical deposition process means that it is...

Description

Gold Plating

Due to the increased packing density of integrated circuits, highly concentrated interconnects have been created, resulting in the current state of necessity of using multiple substrates. A double-sided PCB has two layers, a single-sided PDB has one layer, and a multilayer PCB has at least 3 layers of conductive material. Theoretically, a multilayer PCB could have infinite conducting layers inside that are separated by insulating layers.

Mostly, printed circuit board design must focus on making the minimum length of signal lines and avoiding parallel paths. It is easy to see that in a single panel or even a double panel, these requirements cannot be met because of the limited number of crossovers that can be achieved. In the case of a large number of interconnections and cross-over requirements, the board has to achieve satisfactory performance, it must be extended to two or more layers, so we developed and produced Multi-layer circuit board.

Advantages

It has the advantages of of high assembly density, small size, light weight, high assembly density reduced wiring between components (including components), thus improving reliability; 

It can increase the number of wiring layers, thereby increasing design flexibility; The circuit has a certain impedance; the high-speed transmission circuit can be formed; 

The circuit and the magnetic circuit shielding layer can be arranged, and the metal core heat dissipation layer can be disposed to meet the special functions such as shielding and heat dissipation; 

The installation is simple and with high reliability.

About Us

Hongmy circuits offer two types of gold finish: Electroless Nickel Immersion Gold (ENIG) as a surface finish for the whole PCB, and hard plated gold over plated nickel for edge-connector fingers. Electroless gold gives excellent solderability, but the chemical deposition process means that it is too soft and too thin to withstand repeated abrasion. Electroplated gold is thicker and harder making it ideal for edge-connector contacts for PCBs which will be repeatedly plugged in and removed.

For gold finishing, we can provide gold thickness 1U" to 30 U",which can fullfill your needs of good quality PCBs.

For Glass Transition (Tg) Value, we have Tg130, Tg 135, Tg 150, Tg170 for your choice.

We can make PCBs for many products, like communication equipment, instrument, OA equipment, Driver, Control system, etc.

Any needs of PCBs, pls feel free to contact us.

Hot Tags: half hole with bga multi-layer PCB and high tg laminate, China, suppliers, factory, manufacturers, price, customized, made in China
Related Products

Feedback